The OHPU-8114YG Two-component Matte Oil is a gravure matte oil designed for PET, BOPP plastic films.
The performance characteristics:
1. This product has excellent printing suitability and is suitable for printing on various gravure printing machines;
2. Add curing agent after curing. High temperature resistance and scratch resistance;
3. Suitable for PET / NY / BOPP films double-sided printing, no back viscosity and powder falling phenomenon.
The printing viscosity and dilution ratios:
Depending on the printing speed, it is recommended to use viscosity: 12~16 seconds/25°C No. 3 Chaen Cup
Recommended dilution ratio: Matte oil: mixed solvent = 1:0.4~0.5
The amount of curing agent added:
Print OPP film non-corona surface, add 3%-5% (not more than 5%) of our special curing agent.
Printing PET, NY film, add 10%-15% of our special curing agent.
The diluents:
This product has three solvent ratios, and the user can choose according to the conditions:
No.1 | Ethyl acetate 80% | N-propyl acetate 10% | Ethanol 10% |
No.2 | Ethyl acetate 50% | N-propyl acetate 40% | Ethanol 10% |
No.3 | Ethyl acetate 10% | N-propyl acetate 80% | Ethanol 10% |
Note: No. 1 is the fastest drying, No. 2 is the standard, No. 3 is the slowest drying.
It is recommended to use No. 1 thinner.
The notes:
1. This product is general-purpose matte oil;
2. Check the adhesion and scratch resistance of the matte oil on the printed materials before printing.
3. Shake the ink in the barrel before use to ensure quality consistency;
4. If the matte oil is printed in a small area, since the ink consumption is little, it is necessary to add the curing agent in the printing process every 8 hours.
5. When the remaining ink is reused, it is necessary to add the relevant curing agent and use it in a small amount to ensure the product quality is stable.
6. This product should be kept away from fire and sealed.